puansetiya paper

Contents:

  • Puansetiya corrugated paper
  • Puansetiya paper for scrapbooking

Making paper flowers for many has become a favorite hobby. After the paper has been and remains one of the most affordable and surprisingly plastic materials. Which only paper flowers we do not use - and crepe, and the parchment, and color, and velvet, and even regular office! And what extraordinary flowers while we can do! Moreover, the technology for making use also is very, very different from the well-known origami and finishing a very popular Quilling. However, even without any special equipment, and even with minimal skills of working with paper, you can make your own hands fabulous flowers.

The most rewarding material in this case will be crimped or crepe paper. Let's take, for example, try to make their own hands puansetiyu. This flower is also called the magic of Christmas and the star of Bethlehem. It really is very beautiful, and in hard copy obtained is remarkably similar to the real thing. So Stored green and red paper and puansetiyu do with their hands.

 puansetiya corrugated paper

Puansetiya corrugated paper

Flower turns just like a living! By the way, fresh flowers puansetii are not only red, but white, pink or beige. To make such a miracle with their own hands, you only need patience, accuracy, materials and tools. To produce puansetii we need:

  • Corrugated paper red, yellow, and two shades of green,
  • thin wire;
  • scissors,
  • adhesive (not water based).

Take a roll of pale green paper and cut away longitudinal (along the corrugations) strip on the roll length and width of three to four centimeters. Now, from the strip beginning to make our puansetii stamens. We turn off the paper tight long plait, and at its end tying the knot. Excess paper over the cut the knot. Cut the end of the flagellum with a bundle in the long future stamens. In the same way we do for another seven to nine stamens. Yellow crepe paper similar to green stamens are doing about the same little yellow stamens. Set it aside and proceed to the production of flower petals.

From a roll of red crepe paper cut the transverse strips (cut line is perpendicular to the direction of the flutes). Its width should be about ten to fifteen centimeters, and in general be guided by the desired size of the petals puansetii. Then chop the strips into rectangles. In total we will need seven to ten rectangular pieces (number of petals).

Make the petals. Rectangular blank is folded in half along the corrugations and trim the edges, giving a blank tab form (like an inverted silhouette of mushrooms). The edges of the petals spinning, rolling up paper tube, and get petal puansetii with acute apex and two sharp teeth at the edges. In the same way we do six petals. Next, cut the roll of the red cross another strip width of about four centimeters and a piece of wire length of about ten centimeters.

Lubricate the wire and wrap it with adhesive red corrugated paper, simply by imposing overlapping wire coils on the cut strip. That we will have a flower stalk. We produce six stalks of-skrutikov. Now glue the petioles to the petals of blank, leaving about a third of the free wire. Red petals ready. You're sure to make some of the same lobe of dark green paper. So we repeat the whole process, from the cutting of green rectangular blanks and finishing cuttings adhering to the petals.

Take the yellow and green stamens, collect them into a bundle and connect wire. Cut the cross-striped light-green paper and wrapped around a bundle of stamens, forming a thick stalk of multicolored bouquet. Cut a long piece of wire, and put his foot between the stamens and the free end of the green strips of paper. We fix the wire with glue and make a couple of turns, hiding it under paper.

Continue reeling paper onto a wire around the stem stamens, gradually adding red petals and placing them around a bouquet of stamens in two or three tiers. The first tier - four petals, the lower tiers - the other petals, staggered towards the top. Continue winding wire green paper, adding already green petals. They have also staggered, but at some distance from each other in the height of the stem. We fix the end of the paper strip with glue and appreciate your creation.

 puansetiya of paper with his own hands

Puansetiya paper for scrapbooking

Paper for scrapbooking is unique in its kind. Make it yourself can be replaced by something else can not. This paper differs in density and labeled. To produce puansetii we need:

  • green and red paper density of 116 g,
  • cardboard template petals
  • Tweezers for scrapbooking,
  • ready stamens,
  • Golden powder,
  • pigment ink,
  • adhesive
  • dryer embossing.

Drawing on cardboard three simple petals of different sizes. Note that the tab looks like a regular pointed leaves with a short and wide handle. Cut the templates and cut out of red paper with five petals each size. From the green paper-cut leaves in leaf shape flower puansetii live.

Moisten with water harvesting red petals, achieving soft blotter. We take each petal, folding it in half height and with tweezers laying folds crimping paper. Folds should go to the edge of the petal at an angle to the middle. Similarly, crimping and green leaves puansetii. Expand petals and leaves, give them shape, forming wrinkles and waves, and leave to dry. Dried flower parts become stiff and keep in shape.

While dry the parts, do stamens. Covering their pigment ink, sprinkle golden powder and heated dryer embossing. Now, when the stamens have become gold and petals and leaves are dry, you can collect a flower. Cut a circle of red paper and glue it on the range of the five biggest red petals. The second tier of petals sticking average, placing them in a staggered manner with respect to the bottom. The third tier fasten the smallest petals, placing them in the gaps between the petals of the middle tier.

Make a hole in the middle of a flower, inserted into a beam of golden stamens and fix them at the bottom. On the lower side of the flower glue a few green leaves. That's all puansetiya of paper ready for scrapbooking. Now it can be used for decorating any craft.

That's how easy it is to make of this extraordinary paper flower. So do not be afraid to try - always need to start somewhere. Working with paper nice and easy, so use it at the initial stage of mastering the art of making flowers. Puansetiya really very nice and impressive, and make it their own hands will force even novice needle women. Be of good cheer! And you certainly will.

 Puansetiya paper - man-made miracle

We strongly recommend to read: How to make your own hands puansetiyu

 how to make fabric flowers with his own hands

Contents:

  • Calico Rose
  • Roses to wedding bouquet

Flowers, flowers, flowers ... Well what a woman does not love flowers? Even if we for some reason do not like to take a gift bouquets, it is still indifferent to the flowers left. We like the image of flowers in paintings and photographs, we unconsciously pick things patterned flowered, we buy jewelry in the shape of flowers. Speaking of jewelry. Of course, you know that the colors of the fabric can be made with their own hands. And you do not want to try?

Tech manufacturing textile colors incredibly much. Naturally, all of them is impossible not only to learn, but even to remember. Even the flowers from tissue obtained so different that necessarily someone of us like so. But we will not complicate your task and get acquainted with all the techniques and methods of manufacture of fabric flowers. We are no less a queen zamahnemsya colors! We will try to make a rose out of the fabric by hand. So, let's begin…

 how to make a flower out of tissue with their own hands

Calico Rose

Who said that cotton - the material is too simple for such exquisite flowers like roses? Nothing like this. Even chintz rose roses still remain. And we do them will be in the form of a disheveled way sockets, do not require sewing. Tempting? Then we do calico flower and prepare for it:

  • calico with a small figure,
  • flap of felt,
  • iron,
  • paperboard
  • scissors,
  • hot glue,
  • pins.

We spread the cloth on the table and make an incision on the common thread at a distance of five centimeters from the edge of the canvas. Make a second cut, departing from the first for another two and a half centimeters. Now sharp jerk at first torn off a strip of the first cut and then another strip of calico on the second notch. That this second strip of calico with two edges razlohmachennymi we will do roses. The bandwidth, as you already understood, is two and a half centimeters, and its length is the width of the cut calico (one hundred and twenty centimeters).

Edges with short edges cut the calico strips and cut the strip into two parts length of sixty centimeters. From each of these strips we get a rosette. Now make the first rose. Take a strip of fabric and fold it in half along the entire length of the fold and smooth down with a hot iron. Next, you need to make a piece of cardboard extended thirty centimeters in length and width of almost two (1, 75) centimeters.

Take a strip of cardboard and attached to it a strip of calico, aligning the upper short edges of both bands. Holding hands both bands, cotton pinned to the cardboard using sewing pins and begin wrapping the fabric around the cardboard parts. Coils impose tight an angle of forty-five degrees. Then fasten the other end of the strip pin calico and iron in a mode stripping cotton wrapped in cardboard. We wait until the fabric is completely dry, and gently pull the cardboard strip, keeping the shape zautyuzhennyh folds. Now once again to iron billets for roses, but now without the board.

Take an ordinary pencil and apply it to the end of the strip, is positioned across her and cheat tissue procurement pencil, forming a flower. Screw not tight. Now we take out the pencil, pull out the inner edge of the resulting socket and turn it to the center. The outer edge pinned down at the bottom of the roses. Hot iron to iron our quick flower on top.

Next you need to do the following. Take a felt flap, drip on a spot of glue, whose size should be slightly smaller than the diameter of our calico roses. Glue the flower, remove the pin presses rosettes hand. When the glue has cooled, once again press out flower in stripping mode. When the flower has cooled, cut it along the contour with felt adhesive spots.

That's how we made with his own hands stylish decorative ornament in the form of textile roses. Of these rosettes can collect a whole bunch and make a brooch, you can use them to decorate dresses, blouses, bags and hats. These roses will be a great addition to apparel and home textile patchwork, for kitchen accessories and soft toys, sewn by hand.

 make fabric flowers with his own hands

Roses to wedding bouquet

Today, wedding bouquets have been the object not only of floristry, and needlework. And the thing that is so fashionable Hand Made, even for wedding bouquets, many prefer not to use fresh flowers and artificial, but handmade. And, incidentally, such colors can be easily done by hand. And if they make from the same cloth that wedding dress, the bride will look especially stylish. To make a bouquet of roses to a wedding, we need:

  • otrez suitable quality and color of the fabric for the roses;
  • fabric of the same color, or any other for the bottom part of the bouquet and leaves;
  • Styrofoam cone base of the bouquet;
  • lace and ribbons to decorate the bouquet;
  • interlining;
  • pins;
  • glue gun;
  • Sewing Supplies.

First, with his own hands to make a bouquet of roses, each separately manufacture a flower. For this fabric cut into three strips seven centimeters in length and width of fifty. Take a blank and folding it along the whole length of the face outwards. On the edge of the double-cropped paving wide stitches by hand or on a sewing machine with a weak thread tension. Putting the blank folds, pulling the thread, and fasten it. Now we start to wrap the workpiece, forming a rose, and at the same time fixing the coils double stitch. In the same way we do eight roses.

Now we need to make the leaves. First, make a paper pattern of leaves desired size and shape. Two or three leaf makes a great size and approximately the same number of leaves a little smaller. Translate pattern on interlining given allowances and priutyuzhivaem it to the tissue, which we have prepared for the leaves and cut. For each leaf make two pieces of equal size.

Now add up the blank pairs face side and stitched by the contour, leaving neproshitymi few centimeters from the lower edge of the leaf. Wrenched leaf inside out, smoothing iron seams and sew up the hole left hands.

Now we wrap the cloth Styrofoam cone and fasten it with pins first, then strong small stitches. It remains to decorate the cone of roses. First pretends about how best to place roses in a bouquet, and only then put them on the glue. Now circle the top of the bouquet attach the leaves so that the top of the cone, they disagreed on the part of both open hands, and at the bottom are flat against the base of the bouquet.

The final touch - a bouquet decoration made with their own hands. That's what we use braid and lace. Decorate with a bouquet in accordance with their own ideas about how it should look.

Just like that, and most importantly, in many ways you can make a rose with his hands. Each flower is good in its own way, and every idea deserves attention. And, you can make the roses of organza or chiffon, satin or nylon of the tapes. But these ideas are already known, but the fact that we have offered you - even from new trends Hand Made. In the wild rose is considered the most complicated flower, but do it with his own hands from the tissue is easier than many other flowers. So do not be afraid to dream and to share their ideas with others. Good luck!

 How to make fabric flowers with his own hands? New ideas Hand Made

We recommend that read: Hearts made of paper with his own hands





Яндекс.Метрика