as the vinyl wallpaper glue

Contents:

  • Preparing walls and surfaces
  • Preparing Wallpaper
  • Remove unnecessary
  • Sticking wallpaper in the place of installation of switches and sockets

Though vinyl wallpaper is not new, its popularity has not decreased since the first appearance of the goods on the market in the middle of the last century. They conquered the consumer its advantages: they can be subjected to wet cleaning without fear to spoil their appearance. The modern types of wallpaper further improved: they have different textures, perfectly breathable. Possibility repainting of wallpaper several times allows you to refresh the design and change the situation is not the most cost-effective way. After reading this article, as set out in the information, you will learn how to glue vinyl wallpaper.

This kind of wallpaper a special, dual-layer. The upper part consists of PVC, or vinyl, the lower layer is made either paper or flizelinovye. Because of its two-layer, they weigh more than conventional types of wallpaper. To prevent them from peeling from the surface under its own weight is necessary to use a special kind of glue, created just for this wallpaper. Since the vinyl wallpaper glue?

To pokleit vinyl wallpaper, you will need some more tools. Primed the walls and apply the adhesive to the web will help you a fur roller or a special brush. When working with stitches you use the cushion rubber. Track flatness and precision gluing lines you will be using a spirit level or plummet. In addition to these basic tools required to prepare roulette, masking tape, scissors or a knife for cutting the wallpaper. Cotton cloth will remove smudges of glue. All we prepared? Now you can start the procedure of gluing!

Those who already know how to glue vinyl wallpaper, know that when dry they behave capriciously. They are not allowed to stretch in bonding because they tend to shrink. It threatens that between wallpaper will appear after drying wide gaps, completely spoiling the whole look of the room. That is why many wisely decided to entrust the implementation of this skilled work, and themselves only control the process. Whatever the solution you adopt: their own wallpapering or by the skillful hands of professionals - know all the details of the upcoming workflow will not be superfluous.

 sticking vinyl wallpaper

Preparing walls and surfaces

Making repairs in a residential area, completely remove the wall remnants of the old coating. The buildings do not have to pluck, but the walls are in need of alignment. It is necessary to get rid of all the drops, dents and chips. Before you will be glued to the first of all the necessary strips of wallpaper, make sure the surface is completely dry; This is especially important if you have previously carried out plastering work. It is also recommended to process all the surfaces of anti-fungal compounds.

The walls of wallpaper paste primed diluted according to the instructions, or deep penetration primer. With the level of fighting off a vertical line, a reference point for gluing the first sheet of wallpaper. In any case, we recall that the work should be carried out in a room with a power outage, removing from the wall sockets and switches.

In the room where you intend to glue vinyl wallpaper, should not be a draft and can not use fans and air conditioners. Windows must be closed before the final drying glued canvases. Observe the temperature range - in the room should not be lower than + 23 ... + 25̊ C.

Preparing Wallpaper

Slice the wallpaper wide stripes with an allowance for the length of about ten centimeters. Wallpaper with a pattern often require matching pixel remember about this nuance. Clay bred at least ten minutes prior to the upcoming process of gluing, it is necessary for a better swelling. Gluing vinyl wallpaper should butt without lapping webs at each other. The adhesive is applied to the size of the strip of wallpaper, then paste it and prepare the next cutting position. During track to glue particles we could not get on the outside of the wallpaper. This is especially important if the light-colored fabric.

Gluing vinyl wallpaper is not convenient in splendid isolation, but in the company of someone. One of you will cut into wide strips, and cover them with glue. Another able to apply the adhesive to the wall, and then, rising to eminence, combined with a given vertical line edge panels. They should be pressed against the base of the wall, and followed with a roller to displace the bubbles under the wallpaper got the air moving from the center to the periphery and from the top down. If the edges of the canvas were a drop of glue, you need to eliminate them immediately with a cloth.

 gluing vinyl wallpaper

Remove unnecessary

Once pasted canvas, you need to start cutting of allowances that are near the bottom of the plinth and at the top of the ceiling. It is better to wait until such time as the wallpaper thoroughly dry. The cut should be done with a knife with a sharp blade to the wallpaper could not tear when pressing tool. Ideally remove the plinth completely. If for some reason this is not possible, the cut is carried out exactly along the edge of the plinth. Use a metal ruler, press the wallpaper and start cutting them a very sharp blade of the knife stationery.

When working with the wallpaper should be carefully monitored to ensure that the glue did not get anywhere other than a designated area. In order to glue does not drip on the painted ceiling, wrap a piece of wallpaper somewhere in the top five centimeters, then it will not reach to the ceiling line. When the canvas is completely grabs, the remaining top strip dokleivayut using a fine brush. So you have more chances to keep the ceiling from falling drops of glue on it.

Another difficulty in the fining process - the angles of the room. You can do this adhesive vinyl wallpaper in the corners overlap. This option is suitable for the kinds of plain wallpaper or wallpaper with a large pattern too. This band is letting on the adjacent wall of about one centimeter, followed by a sheet of this site is blocked. Do not forget about the strict observance of the vertical position of the wallpaper. Gluing lapped by using a special glue, which can be easily found on sale. A disadvantage of this embodiment is not very aesthetic outcome.

The second option is more time-consuming, but the result is better quality at times. To begin the process pasting should be the same as in the first method, except that the allowance should be left wider. They should be at least two to three centimeters. When you make sure that the pasted canvas is completely dry, you can start immediately to cut two sheets vertically. To facilitate this task themselves (after all, need to monitor the evenness of the cut), use a metal ruler or trowel with a blade width of thirty centimeters. Once you have removed the cut strip, bend the edge of the wallpaper to put the glue on them. Then go for this place roller or trowel plastic. That's it - you have managed to make a perfect seam!

Sticking wallpaper in the place of installation of switches and sockets

Sticking wallpaper on the wall of the normal procedure, observing all the rules, the expected time for drying cloth, and then penetrate into the holes for switches and sockets. Do not fail to repeat that before starting work, you must take precautions and turn off the electricity. All wiring accessories previously spun. When the wallpaper to dry holes are made, it will be possible to return them to the place.

 Vinyl wallpaper pasting wall in subtlety

 as the glue liquid wallpaper

Contents:

  • Liquid wallpaper. What is it?
  • The advantages of liquid wallpaper
  • Disadvantages of liquid wallpaper
  • How to glue the liquid wallpaper?

Liquid wallpaper made just a revolution in the world of construction and gained popularity among many. Those who are already faced with them will be a long list of advantages: both beautiful and environmentally friendly, and take care of them easy, and very practical. But often, if necessary, to change the situation favored the old paper wallpaper, and just because a few people know how to glue liquid wallpaper. However, do not be afraid, everything is much easier than it might seem at first glance.

Liquid wallpaper. What is it?

Before you go to the section where we will explain how to properly glue liquid wallpaper, let's find out what it is, what are the advantages and whether the disadvantages of this type of materials.

Liquid Wallpaper in its structure is more like dust or flakes. They are not sold in rolls, like we used to, and in plastic bags, weighing 1 kg. The composition of wallpapers includes natural cotton or cellulosic fibers, dyes, and the acrylic adhesive composition components. There are plenty of additives, such as silver or gold thread, quartz chips or mica.

After the coating liquid wallpaper wall surface becomes pleasant to touch and provides a seamless coating with a thickness of 10 mm. When the wallpaper dry, they remind in their structure foam: the surface is rough and soft.

There are several types of liquid wallpaper, differing in texture after application: one smooth and subtle, others more like a fabric with a noticeable relief.

 how to glue the liquid wallpaper

The advantages of liquid wallpaper

  • Possess antistatic properties and does not attract dust. Helps to create a good indoor climate.
  • Universal. Can be used for decoration of the corridor and the bathroom, and a living room or child's room.
  • Can be used for finishing the apartments in the new building. Not afraid of shrinkage and are not deformed during the operation.
  • Able to hide the slight defect walls. In addition, they do not have any seams and give the surface of a perfectly smooth look.
  • The material allows the walls to breathe and thus perfectly absorbs sound.
  • Glued on any surface
  • Quickly restored when needed. The damaged area is not a reason to conceive new repair. It can be removed by simply soak with a spatula. In place of the old pieces of the new composition is easy to apply, and you again perfect repair.

Disadvantages of liquid wallpaper

Yes, there are still shortcomings. But they are so insignificant that they may find insignificant, it:

  • The high cost of the material.
  • The lack of moisture resistance. Liquid wallpaper washed with water, so be careful if you use them for decoration of bathroom or decide to wipe them with a view to maintaining the purity of a damp cloth. You can, of course, cover them with a protective varnish on top, but then there will be no "breathing" walls.

How to glue the liquid wallpaper?

For a start it is worth noting that the package weighing 1 kg last about 5 square meters. m. walls. The first stage does not differ from the procedure that we perform before pasting paper wallpaper. It's about preparing the walls.

Remove from the surface of the walls of all the remnants of the previous repair and metal objects, if any. If your wall has its own unique color, it will have to get rid of it by using enamels, primers and other building tricks.

If the wall can not boast of an ideal surface, it is best to soak solution FG or any other impregnation. If your plans do not have the appearance of yellow spots, the constant companion of old apartments, the best pre-wall paint over white latex paint.

Wood surfaces can absorb excess moisture, so before you put on them wallpaper, make sure that they have sufficient thickness and they are not deformed in the process of applying wallpaper.

Prepare for the application of liquid wallpaper on the walls

Take a suitable container and fill it with warm water according to the instructions. The dry mixture was added in small portions and mix thoroughly using a drill-mixer. Ready wallpaper similar in consistency to a thick cream. If there were any bad stir part, it is better to remove them.

After mixing, leave the wallpaper for 20 minutes, then mix them again. Important: the prepared surface must be covered at one time, so prepare immediately an amount of mixture to her enough.

Application of liquid wallpaper on the walls

You can find a lot of videos where you will be like glue, liquid wallpaper, but we have prepared for you a little instruction, which is bound to be useful.

What you need:

  • Capacity large dilution of the mixture;
  • Roller or trowel for leveling wallpaper;
  • Orchard (you can do without it);
  • Roller-knurling to give relief (if necessary);
  • Finish.

Take a little mixture with a spatula and distribute it on the surface. Wallpaper glued tightly under them should not be voids or bumps. Smooth out the first portion of the wall, apply a second only, check that between them had no noticeable border - each piece must move seamlessly into the next.

If the result does not satisfy you and you formed a bald spots or, conversely, a ball, try to remedy the defect, lightly spray the wallpaper, and then fill with a mixture of land and level it. Adjustments should not get carried away, after the third soaking the wallpaper will be ruined.

The rate of application of wallpaper on the wall is greatly increased if you apply a special gun - hopper. Another important point: the application of liquid wallpaper on the wall should be carried out at a temperature no lower than 10 degrees Celsius.

Thus we are working out the entire mixture and after the wall is completely processed, give a wallpaper dry. This typically takes from 12 to 72 hours, depending on the level of humidity, ambient temperature and the grade of material.

 Working with liquid wallpaper: Tips for applying




Яндекс.Метрика